Troubleshooting - Sony KV-29CS60K Operating Instructions Manual

Here are some simple solutions to problems which may affect the picture and sound.
Problem
No picture (screen is dark), and no sound.
Poor or no picture (screen is dark), but good
sound.
No picture or menu information from equipment
connected to the Scart socket.
Good picture, no sound.
No colour on colour programmes.
Distorted picture when changing programmes or
selecting Teletext.
Wrong characters appear when viewing teletext.
Picture slanted.
Snowy picture when viewing a TV channel.
No unscrambled picture whilst viewing un
unscrambled channel with a decoder connected
through the scart connector
Remote control does not function.
The standby indicator
• If you continue to have problems, have your TV serviced by qualified personnel.
• NEVER open the casing yourself.
2/ 2.
on the TV flashes.
Suggested Remedy
• Check the aerial connection.
• Plug the TV in and press the
the TV.
• If the standby indicator
or a numbered button on the remote control.
• Using the MENU system, select the "Picture
Adjustment" display and select "RESET" to return to
the factory settings.
• Check that the optional equipment is on, and press
the button of the remote control repeatedly until
the correct input symbol is displayed on screen.
• Press the button on the remote control.
• Check that "TV Speakers" is "On" in the "Detail Set
Up" menu.
• Check the Headphones are not connected.
• Using the MENU system, select the "Picture
Adjustment" and select "RESET" to return to the
factory settings.
• Turn off any equipment connected to the scart
connectors on the rear of the TV.
• Using the menu system, display the "Language/
Country" menu and select the country in which you
are operating the TV set.
For Cyrillic languages, we recommend you select
Russian as the country if your own country does not
appear in the list.
• Using the menu system, select the "Picture Rotation"
option in the "Detail Set Up" menu to correct the
picture slant.
• Using the menu system, select the "Manual
Programme Preset" menu and adjust Fine Tuning
(AFT) to obtain better picture reception.
• Using the menu system, select the "Noise Reduction"
option in the "Detail Set Up" menu and select "Auto"
to reduce the noise in the picture.
• Using the menu system, display the "Set Up" menu.
Then select the "Detail Set Up" option and set "AV2
Output" to "TV".
• Check that the decoder is not connected to the
1 scart socket.
• Replace the batteries.
• Contact your nearest Sony service centre.

Troubleshooting

button on the front of
is on press the button
Additional Information
GB
1/
21