Sony KV-29CS60K Operating Instructions Manual page 8

Switching on the TV and Automatically Tuning
5 The Auto Tuning menu appears on the screen. Press the OK
button to select Yes.
6 The TV starts to automatically search and store all available
broadcast channels for you.
This procedure could take some minutes. Please be patient
and do not press any buttons, otherwise the automatic tuning
will not be completed.
If no channels were found during the auto tuning process then
a new menu appears automatically on the screen asking you
to connect the aerial. Please connect the aerial (see page 6)
and press OK. The auto tuning process starts again.
7 After all available channels are captured and stored, the
Programme Sorting menu appears automatically on the
screen enabling you to change the order in which the
channels appear on the screen.
a)
If you wish to keep the broadcast channels in their tuned order,
go to step 7.
b)
If you wish to store the channels in a different order:
1 Press the v or V button to select the programme number that
has the channel (TV Broadcast) you wish to rearrange, then
press the b button.
2 Press the v or V button to to select the new programme
number position for your selected channel (TV Broadcast),
then press B.
3 Repeat steps b)1 and b)2 if you wish to change the order of
the other channels.
8 Press the MENU button to remove the menu from the screen.
Your TV is now ready for use.
8
First Time Operation
Do you want to start
automatic tuning?
Yes
No
OK
Auto Tuning
Programme: 01
System: B/G
Channel: C21
Searching...
No channel found
Please connect aerial
Confirm
OK
Programme Sorting
Programme:
01 TVE
02 TVE2
03 TV3
04 C33
05 C27
06 C58
Select channel:
OK
Exit:
MENU
Programme Sorting
Programme:
01 TVE
02 TVE2
03 TV3
04 C33
05 C27
06 C58 05 C27
Select new position:
OK
Exit:
MENU
MENU