How do I set up scheduled recording in D-ViewCam?
17.
Step 1: Launch D-‐ViewCam and click the Schedule ConfiguraBon icon.
Step 2: Select the camera(s) you want to apply the recording schedule to, then create a
schedule and click the Configure icon.
Step 3: Under Mode, ensure Always Record is selected.
Step 4: Under the Time secBon, specify the Bme when you want the recording to occur and
click OK. You can also determine how many seconds you wish Pre-‐record and Post-‐record
for when moBon is detected.
Note: If you want to record audio, be sure to check the Record Audio box under the audio
secBon.