Communication Modules; Cp50M1 Communication Module; Areas Of Application - Siemens SIMATIC TDC System Manual

Communication modules

6.1

CP50M1 communication module

6.1.1

Areas of application

CP50M1 is a communication module with communication memory function and two
PROFIBUS DP interfaces (MPI interface only on X1).
Use cases include:
● Interfacing with distributed I/O devices and/or drives (master and/or slave function)
● Central commissioning of all CPU modules in the rack (MPI nodes)
● Buffer memory for data exchange between CPU modules
● Function for routing to other CP modules
● Connection of SIMATIC visualization components, e.g.: WinCC, or OP/TD
Replacing a CP50M0 with a CP50M1
Note
Replaceent parts compatibility
The CP50M1 is not compatible with CP50M0 as a replacement part.
If a CP50M0 is replaced by a CP50M1, it must be re-configured in HW Config.
Article number
PROFIBUS DP interface (X1 / X2)
MPI interface
Parameter assignment and diagnostics inter-
face
Function for routing to other CP modules
Communication memory
Buffer memory module
VMEbus configuration memory
SIMATIC TDC hardware
System Manual, 08/2017, A5E01114865-AL
www.aotewell.com
sales@aotewell.com
Industry Automation
CP50M0
6DD1661-0AD0
2
(X1 + X2 optionally DP or
MPI)
2
yes
no
----
DRAM, 8 MB
----
6
CP50M1
6DD1661-0AD1
2
(X1 optionally DP or
MPI)
1
yes
yes
SDRAM, 1MB
SDRAM, 8 MB
NOR Flash, 512 KB
121
+86-755-8660-6182