Interface Modules Su12 Und Su13 - Siemens SIMATIC TDC System Manual

7.6

Interface modules SU12 und SU13

Article number
SU126DD1681-0AJ1
SU136DD1681-0GK0
General
SU12
Interface module SU12 is a
10-pole terminal block that is used to wire the
analog or digital signals of a
10-pole ribbon cable connector (SIMATIC side) to
cage clamp terminals (plant side).
Module design
SU12
SU13
SIMATIC TDC hardware
System Manual, 08/2017, A5E01114865-AL
www.aotewell.com
16 spring-loaded terminals (X2)
10 spring-loaded terminals for analog or digital signals on plant side
6 unused spring-loaded terminals
10-pole connectors X1.
50 screw terminals (X2)
Connection of 50 signals
50-pole connector X1.
sales@aotewell.com
Industry Automation
7.6 Interface modules SU12 und SU13
SU13
Interface module SU13 is a
50-pin terminal block that is used to wire 50 sig-
nals routed via a 50-pole connector (SIMATIC
side) to screw terminals (plant side).
+86-755-8660-6182
Interface module
211