Magnetic Autocontrol MPH 112 Operating Instructions Manual page 88

Repair work
58175005EN 01/2009 MPH-112
Version: 00
Next, block the drive unit with fixing screw (9). Make sure that the
screw is aligned with the hole in the bell-crank and engages. Then
secure the screw with a locknut so that the drive unit is blocked with
a minimum of play.
Loosen the nuts (10) for the cover strip carrier, but do not remove
them.
10
10
9
Fig. 14-12 View of central housing with mounting panel swung to
the side
Pull the carrier down so that the carrier pin releases the strip.
Now the cover strip for the guide can be removed away from the
glass wing path.
To install a new cover strip, proceed in the reverse order.
Page 88/96