Magnetic Autocontrol MPH 112 Operating Instructions Manual page 81

Repair work
58175005EN 01/2009 MPH-112
Version: 00
Block the drive unit with fixing screw (7). Make sure that the screw is
aligned with the hole in the bell-crank and engages. Then secure
the screw with a locknut so that the drive unit is blocked with a
minimum of play.
Loosen the nuts (8) for the cover strip carrier, but do not remove
them.
8
8
7
Fig. 14-5 View of drive unit with mounting panel swung to the side
Page 81/96