Connecting Other Equipment to the TV
A wide range of equipment can be connected to the TV through the front and rear sockets.
Connecting equipment to the rear sockets
C
VCR
DVD
Decoder/Set top box
(SMARTLINK)
3
s
3
VCR
2
DVD
1
DIGITAL
OPTICAL OUTPUT
ANALOGUE
. . .
MODEM
5V 200mA
R/D/D/D
L/G/S/I
A
D
F
Hi-Fi
Connecting a DVD player
Connect a scart lead from the B socket of the TV to a scart socket on your
1.
DVD player (refer to your DVD instruction manual)
2.
Insert a DVD into the DVD player, then press the 'PLAY' button. The picture
appears automatically on the TV.
If not, press the
picture appears on screen.
3.
Press the DIGITAL/
operation.
Connecting a Decoder/Set top box
Connect a scart lead from the A socket of the TV to a scart socket on your
1.
set top box (refer to your set top box instruction manual).
2.
Switch on your set top box. The picture appears automatically on the TV.
If not, press the
picture appears on screen.
3.
Press the DIGITAL/
operation.
Connecting a Smartlink VCR
Smartlink is a direct link between the TV and a Smartlink VCR. Ensure your Smartlink
VCR is connected to the C socket labelled (
wired 21 pin scart lead. For more information on Smartlink, refer to your Smartlink VCR
instruction manual.
Connecting other equipment
MD/DAT player
Modem
Note:
Connecting cables are not supplied.
button on the remote control repeatedly until the
/
button when you wish to return to normal TV
/
button on the remote control repeatedly until the
button when you wish to return to normal TV
SMARTLINK
B
E
) i3/r3
, using a fully
VCR
33