Viewing A Traditional Text Service - Sony KD-32NX200E Instruction Manual

Viewing traditional teletext
OK
PROG
Most analogue TV channels broadcast a text service. The index page (usually page
100) provides information on how to use the service. Please ensure you are receiving a
strong signal or some text errors may occur.
Switching on the text service
1 Select the TV channel that carries the text service you wish to view.
2
Press the button to enter Picture and Text (P&T) mode. The screen is
divided into two with the Text display on the left and the TV channel in the
right corner.
Press the button a second time to enter full screen Text mode.
Press the button a third time to enter Mix mode.
3 Press the numbered buttons to enter a three digit number for the text page
you wish to view. Your selected page appears on screen.
4 Enter more 3 digit page numbers as required.
5 When you have finished viewing the text service, press the DIGITAL/
button to remove the text display from the screen.
How to use the text features
Text Features
To select the next or
preceding page
To select a sub page
To keep a page on
display
To use Fastext
To use the Page
Catching feature
Reveal
How to select
Press the or button.
A text page can consist of several sub pages. In this case
an information box is displayed at the bottom of the screen
showing the number of sub pages available. Select the
sub pages by pressing the V or v button.
Press the button. Press again to cancel.
Fastext allows you to access pages with one button push.
When Fastext is available, four coloured items appear at
the bottom of the screen. Press the corresponding
coloured button on the remote control to display the page.
Select a page that contains several page numbers (e.g.
the index page), then press the OK button. Press the V or
v button to highlight the page number required, then press
the OK button again. Your selected page appears on
screen.
Press the button to reveal hidden information on the
page (such as answers to a quiz).
Basic operation
11