Overview Of The Remote Control Buttons - Sony KD-32NX200E Instruction Manual

Overview of the remote control buttons

Mute button
Press to mute the sound. Press again to
restore.
DIGITAL/ button
Press to switch between digital and
analogue mode.
MEMORY STICK button
Press to display the Memory Stick menu.
Buttons 0 - 9
Press to input the required channel
number. For numbers 10 and above,
enter the second digit within 2 seconds.
GUIDE button
Press to launch digital text or digital
interactive services.
MODE button
This remote control operates not only
Sony DVDs and VCRs, but also those
made by other manufacturers. Press this
button to select the type of equipment
you want to control. A green light appears
momentarily to indicate
selected.
Note:
Before operating your VCR or DVD, you must
enter the correct configuration code. Please
refer to the section 'Using the remote with
VCR/DVD players'.
Text button
Press to enter text mode.
EPG button
Press to display the
Programme Guide when in digital mode.
Control pad
Use these buttons to navigate through
the menu system of the TV.
Note:
When the MODE button has been set to VCR
or DVD, the control pad operates the main
functions of your VCR or DVD.
Coloured buttons
These buttons are used for the text and
digital menus. Refer to the relevant
sections in this instruction manual.
the mode
Electronic
VIDEO
Press to switch off your VCR or DVD temporarily.
VIDEO TV
/ /
Press again to return to normal operation.
/
TV
Press to switch off your TV temporarily. The red
indicator on the front of the TV illuminates. Press
again to return to normal operation
Input button
Press to select signals from equipment connected
to the TV sockets (refer to 'Connecting other
equipment to the TV').
In text mode press to keep a page on display. Press
again to cancel.
Previous channel button
While watching Analogue TV pressing this button
will return you to the previous channel you were
watching.
While watching Digital TV pressing this button can
also act as an 'EXIT' key and cancel any Digital text
application that may be running.
Screen format button
PROG Press repeatedly to change the screen format.
Info button
MENU
Press to display the INFO menu in digital mode.
When watching analogue programmes press to
reveal information such as programme number etc.
When in text mode, press to reveal hidden
information such as answers on quiz pages. Press
once more to remove hidden information.
INDEX button
When in digital mode, press to display the Channel
Index menu.
OK button
Press to display a list of channels on screen. Press
the V or v button to scroll through the list until the
channel you wish to view is highlighted, then press
the OK button to display that channel on screen.
PROG +/- button
Press to select the next or previous programme.
Volume + and - button
Press to adjust the volume to the desired level.
MENU button
Press to enter the menu system of this TV.
Basic operation
/
button
button
/Hold button
9