Switching Between Digital And Analogue Programmes; Finding Your Video Channel - Sony KD-32DX150U Instruction Manual

6

Switching between digital and analogue programmes

/
DIGITAL
7

Finding your video channel

/
DIGITAL
PROG
1. Press the DIGITAL/
digital and analogue mode.
Notes:
If the TV is in digital mode an information banner appears briefly on screen when you change
channels.
If the TV is in analogue mode the channel number appears in green lettering when you change
channels.
If you connected a VCR to your TV when following the 'Connecting an aerial and a VCR
to the TV' instructions, you now need to find your video channel.
1. Ensure the TV is in analogue mode. If not press the DIGITAL/
the remote control.
2.
Press the PROG+/- button on the remote control until the picture from the
pre-recorded tape appears on screen.
Notes:
If you wish to move your video channel to a different programme number, refer to the
'Programme Sorting' section of this manual.
If you connected your VCR using a scart lead, press the
remote control until the picture from the pre-recorded tape appears on the TV screen.
button on the remote control to switch between
/
Getting started
button on
button repeatedly on the
7