Table of Contents
Advertisement
Digital features
The Main menu
1
2
3
4
5
6
7
8
9
0
OK
OK
16
Parental Control
This feature allows you to set an age limit for viewing programmes. If any films or
programmes classed above the age limit you have set are broadcast, you will be
requested to enter a PIN code before viewing is allowed.
If you have not already set a PIN code:
1.
Press the
button on the remote control to obtain the Digital Info display.
Press the BLUE button to display the Main menu
2.
Press the V or v button to highlight 'Parental Control' then press the OK
button to display the Parental Control menu.
3.
Press the RED button to display the PIN entry box on screen.
4.
Use the numbered buttons on the remote control to enter a 4-digit number of
your choice. As you enter each digit it will be represented by a * in the PIN
entry box. Enter the code again to confirm.
Note:
This will be your PIN number for the future - please use a number you can remember
easily.
5.
Press the OK button to confirm your PIN code.
6.
Press the BLUE button to return to the Detail Set-up menu.
7.
Press the BLUE button to return to the Digital Set-up menu.
Follow Steps 2-5 of the instructions below:
If you have already set a PIN code:
1.
Press the
button on the remote control to obtain the Digital Info display.
Press the BLUE button to display the Main menu.
2.
Press the V or v button to highlight 'Parental Control' then press the OK
button to display the Parental Control menu.
3.
Using the numbered buttons on the remote control, enter your 4-digit PIN
code. As you enter each digit it will be represented by a * in the PIN entry box.
Press the OK button to confirm your PIN code.
4.
With the 'Age' box highlighted, press the V or v button to set the age limit you
desire then press the OK button to confirm your setting
5.
With the 'Age' box highlighted, press the V or v button to set the age limit you
desire then press the OK button to confirm your setting
Auto Tuning
This feature allows you to automatically re-tune all available digital channels.
1.
Press the
button on the remote control to obtain the Digital Info display.
Press the BLUE button to display the Main menu.
2.
Press the V or v button to highlight 'Auto Tuning' then press the OK button to
display the Auto Tuning menu.
3.
Press the RED button to begin tuning in all available digital channels.
Note:
If you wish to cancel the 'Auto Tuning' process, press the BLUE button.
Hide quick links:
Advertisement
Table of Contents
