Using The Channel Setup Menu - Sony FD Trinitron WEGA KV-32FS200 Operating Instructions Manual

Using the Menus
Using the Channel Setup Menu
To access the Channel Setup menu, refer to the following steps:
TO Display To Highlight !P-)I To Select
MENU
Press _' to highlight an option then press CE).
Favorite 1 Use the O or '_" buttons to select the position (1-8) where you want to set a
Channels favorite channel, then press _3.
Quick access 2 Use the _" or _" buttons to fred the channel you want to add to your favorite
to favorite channels.
channels 3 Press _ to select the channel. The TV will automatically change to the
selected channel.
4 Press <_ to return to the Channel Setup menu or press _u to exit.
Cable
Use tlae _ or '5 buttons to select from one of the following options, then press CE)
to select it.
On: Select if you are receiving cable channels with a CATV cable.
Off: Select if you are using a TV antenna.
Channel Fix
Use the O or '2, buttons to select from one of the following options, then press CE3
to select it.
Off:
2-6:
AUX 2-6:
Video 1 :
Channel Fix is not set.
Select ;',/hen you want to control all channel selection tt_rough a cable
box or VCR. Select the appropriate channel (usually 3 or 4) and use
the cable box's or VCR's remote control for channel selection.
t Jse this setting instead of the 2-6 if you want to change channels
using a cable box. VCR or satellite receiver and you've connected it
to the AUX input (KV-27FS200, KV-32FS200. KV-36FS200 onl3).
Select from available video inputs when you have connected video
equipment (e.g. satellite receiver) and you want your TV fixed to it.
27