Advertisement
Cleaning the TOSHIBA Label Printer for Business Partner Systems
Model #B-EV4D-GS24
8. When finished cleaning, replace the label roll so that the paper comes off the
top of the roll towards the front of the printer (with the sticky side down).
9. Slide the Media Holders together so that the label roll fits snugly.
10.
Move the Media Holder Lock Switch down to the Lock position.
11.
Thread the label roll over the blue roller and under the metal lip to feed
through the Media Outlet until the label extends beyond the front of the printer.
12.
Turn the Media Guide Adjustment Dial in the direction indicated by the arrow
(Figure 22) to move the guides inward to hold the label in place. Reverse the
dial adjustment if the Guides begin to crumple the roll. The Guides should be
positioned to allow free movement of the roll under them, as shown below.
Figure 22: Media Guides & Media Guide Adjustment Dial
November 2016
Figure 21: Media Holder Lock Switch
Always follow instructions to ensure the protection of personnel, devices, and data
LIMITED RIGHTS NOTICE
V2.1
Page 14 of 16
Advertisement
