Advertisement
Cleaning the TOSHIBA Label Printer for Business Partner Systems
Model #B-EV4D-GS24
Step 4 — Clean the Media Housing
1. The TOSHIBA Label Printer must remain powered OFF before continuing with
this Step.
2. Release the label roll by turning the green Media Guide Adjustment Dial
towards the back of the printer to move the Media Guides outward.
Figure 14: Media Guides & Media Guide Adjustment Dial
3. Gently rotate the label roll towards the back of the printer so that it is wrapped
up.
November 2016
Figure 15: Label Roll
Always follow instructions to ensure the protection of personnel, devices, and data
LIMITED RIGHTS NOTICE
V2.1
Page 11 of 16
Advertisement
