Fluke ThermoView TV40 Series User Manual page 59

Accessories
7
Mechanical Accessories
Secure the camera with tooth lock washer and pan
head screw to the rail. Use the delivered hex
wrench.
Note a distance between the camera front and the
rail of approx. 10 mm (0.39 in)
approx. 10 mm (0.39 in)
Fit the two cable glands to the rear lid.
wrench size W30 (30 mm/1.2 in)
torque about 10 Nm
Fix the earth tag with the nut on one of the cable
glands (on the inner side of the rear lid).
Mount the sealing inner and the end cap to each
cable.
61
1.800.561.8187 information@itm.com
www. .com