Water Cooling Enclosure (A-Tv-Ap-Wc); Figure 7-18: Water Cooling Enclosure - Fluke ThermoView TV40 Series User Manual

Thermal imager camera
Table of Contents

Advertisement

®
ThermoView
TV40 Series
Users Manual, Rev. 1.1, Apr 2019

7.3.3 Water Cooling Enclosure (A-TV-AP-WC)

The Water Cooling Enclosure (A-TV-AP-WC) allows the camera to be used in ambient temperatures up to 140°C
(284°F) with water cooling. The cooling media should be connected using 1/8" NPT fittings requiring 6 mm (0.24 in)
inner diameter and 8 mm (0.31 in) outer diameter for the tube.
For ambient temperatures exceeding 140°C (284°F), the ThermoJacket can be used. This accessory allows
Max. ambient temperature:
The water cooling enclosure comes with an air purge collar. The air purge should be always used to keep the lens
dry. For more information, see section 7.3.2
56
1.800.561.8187
Note
operation at ambient temperatures up to 315°C (600°F)!
140°C (284°F)
at water inlet temperature of 20°C (68°F)
and a flow rate of 1.6 l / min (0.4 gallon / minute),
chilled water below 10°C (50°F) is not recommended
Air Purge Collar

Figure 7-18: Water Cooling Enclosure

www.
.com
(A-TV-AP), page 54.
information@itm.com

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Thermoview tv43Thermoview tv46

Table of Contents