Led Torch - ALDI Workzone Titanium Xfinity Series Instruction Manual

13
D1 D2
9
9
8.5 Belt clip (10) (See Fig. E)
WARNING! To reduce the risk of serious personal injury,
ensure the screw holding the belt clip (10) is secure.
The side belt clip (10) is used to assist to clip the torch to your waist
belt while working. To install, insert the assembly screw through the
belt clip screw hole into the retaining hole on the torch, and using a
philips head screwdriver (not supplied), tighten the screw by turning
in a clockwise direction
NOTE: The belt clip (10) can be assembled onto either side of the

LED torch.

IMPORTANT: When attaching or replacing the belt clip (10), use
only the assembly screw that is provided. Be sure to securely tighten
screw.
E
AFTER SALES SUPPORT
13
e-mail:
info.aldi@positecgroup.com
1300 889 028 (toll free)
MODEL No.:
CLP18WA.9 • 2323 • 05/2019