ALDI Workzone Titanium Xfinity Series Instruction Manual page 114

15
D1 D2 D3
7.5. Selecting the right sand paper
Selecting the correct grit of sandpaper is an extremely important
decision that will allow you to achieve the best quality sanding finish.
Coarse grit will remove the most material and finer grit will give you
the best finish in all sanding operations. The condition of the surface
to be sanded will determine which grit will do the job.
If the surface is rough, start with coarse grit and sand until the
surface is uniform. Then use a medium grit to remove any scratches
left by the coarse grit. Complete using a finer grit for finishing the surface.
NOTE: Always continue sanding with each grit until the
surface is uniform.
7.6 To install the battery pack (See Fig. E1)
WARNING: Ensure the on/off switch (1) is in the OFF position
before attaching the battery pack.
Slide the fully charged battery pack (3) onto the sander with
sufficient force until it clicks into position.
7.7 To remove the battery pack (See Fig. E2)
Depress the battery pack release button (12) firmly, then slide the
battery pack (3) out and away from the sander.
AFTER SALES SUPPORT
15
e-mail:
info.aldi@positecgroup.com
1300 889 028 (toll free)
MODEL No.:
CPS18WA.9 • 2323 • 05/2019