Picking Up New Messages - Sony SPP-A968 Operating Instructions Manual

Operating from an outside phone (continued)

Picking up new messages

1
Call your phone from a touch-tone phone.
2
While you hear your greeting play, press
(security code).
You hear a long confirmation beep and the greeting stops. Following the
voice guide informing you of the number of messages recorded, the
phone stands by for you to enter a control code.
3
To do other operations, enter the control code within 20 seconds (see the
table below). To quit, hang up the phone.
Control codes for remote operations
To
Play back messages in MAILBOX 1 (#) (1)
Play back messages in MAILBOX 2 (#) (2)
Play back messages in MAILBOX 3 (#) (3)
Repeat the current message
Skip the current message
Erase the current message
Erase all messages in MAILBOX 1
Erase all messages in MAILBOX 2
Erase all messages in MAILBOX 3
Record a new greeting
(up to one minute)
Turn on the answering function
Turn off the answering function
Stop the current operation
If you forgot to turn the answering function on
Call your phone and let it ring 10 times until it answers. Then the answering function
automatically turns on.
Note
If you enter a wrong remote security code three times, the line will be disconnected.
To use the toll-saver feature
Set RINGER SELECT to TS. See page 31 for details.
38 US
Answering Machine Features
(#), and your remote ID code
Press
(#) (4) while the message is being played back
(#) (6) while the message is being played back
(#) (9) while the message is being played back
(#) (9) (#) (1)
(#) (9) (#) (2)
(#) (9) (#) (3)
(*) (7). When you hear a long beep, start recording your
greeting. Press (*) (*) to stop recording.
(*) (0)
(#) (0)
(*) (*)