Picking Up New Messages - Sony SPP-A946 Operating Instuctions / Manual de instrucciones Operating Instructions Manual

Operating from an outside phone (continued)

Picking up new messages

1
Call your telephone number from a touch-tone phone.
2
When you hear the greeting, press (#) and enter your remote ID code
(security code).
You will hear a confirmation beep.
The number of new messages will be announced.
3
Press the keys in the "Table of control codes" below for the desired
operation command.
4
When you finish, disconnect the line.
Notes
• Do not let two seconds elapse between each digit of the remote ID code (security code) and
the control code.
• If you did not turn on the answering machine, your phone answers automatically after 10
rings.
• If you enter wrong remote ID code (security code) three times, the line will disconnect.
• If no keys are pressed within 20 seconds, the line will disconnect.
Tip
Cut off the Remote Control Card and carry it with you to see how to operate from an outside
phone.
Table of control codes
To
Play back messages in MAILBOX1
Play back messages in MAILBOX2
Play back messages in MAILBOX3
Repeat backward
Skip forward
Erase individual message
Erase all the messages in MAILBOX1 (#)(9)(#)(1)
Erase all the messages in MAILBOX2 (#)(9)(#)(2)
Erase all the messages in MAILBOX3 (#)(9)(#)(3)
Record greeting
Turn answering machine on
Turn answering machine off
Stop operation
US
46
Answering Machine Features
Key Notes
(#)(1)
Plays back from the first new message.
(#)(2) Plays back from the first new message.
(#)(3) Plays back from the first new message.
(#)(4)
Press during play back to repeat a
message.
(#)(6) Press during play back to skip forward.
(#)(9) Press during play back.
(*)(7) "Now recording" is announced.
(*)(0) Turns the system on. "Answering
function is on" is announced.
(#)(0)
Turns the system off. "Answering
function is off" is announced.
(*)(*) Stops every function.