STMicroelectronics STM32Cube Quick Start Manual page 25

•
From the dashboard, create a new network (see slide #26).
• Enroll a new gateway by clicking on "Add gateway to Network" (see slide #27).
•
Select your gateway model from the list (suggested: Multitech Conduit).
•
Provide your gateway MAC address.
•
After gateway registration, a specific firmware needs to be installed on the
gateway.
•
To download and install the firmware, SSH connection to the gateway is
required and the gateway needs Internet access.
•
Follow the setup guide to understand how to install the firmware (see next
slide).
FP-ATR-LORA1: Step by step setup
LoRa gateway setup (1/4)
25