Instf - IBM RT PC Problem Determination Manual

in s tf
li
Use the instf command to copy an AIX file to a minidisk. The file
is copied sequentially starting at sector 0 of the minidisk. The
previous contents of the minidisk are destroyed.
Format:
in stf
A lX n a m e m in id isk-id
Param eters:
AlXname
This is an AIX file identifier and must contain a complete
file system pathname beginning with the device and the
directory on the device (/hdO/usr for example).
m inidisk-id
This identifies the minidisk to receive the file.
You can use this command to install VMF directly on a minidisk.
To do so, make sure the VRM Install diskette is in the top drive
and then issue the following commands:
crmd iodn 550 -nvmf
instf /4/ldlist/vrinst.0050.00 vmf
and then use the setattr command to make VMF an auto-IPL
minidisk.
Use li to display the contents of an AIX directory. The entries are
displayed in the order they physically exist in the directory.
Format:
li
<AIXname>
Appendix A. VRM Maintenance Facility A-23
-p