Step 3. Vrm Dump (User Started) - IBM RT PC Problem Determination Manual

S tep 3. VRM D um p (U ser S tarted )
If you want to start the dump utility, follow these steps.
1. Remove the dump diskette from the back of this manual.
The dump diskette may be any formatted high-capacity
Note:
diskette. A dump diskette should have been created and placed
in the back of this manual when the AIX Operating System was
installed.
2. Press
CTRL-ALT-numpad8.
A alternating with abend code 00 is displayed in the
c6
two-digit display.
CONTINUE to next page.
(Use the left key.)
ALT
Section 2. The Dump Utilities 2-7
AJZB239