Debug - IBM RT PC Problem Determination Manual

debug

A-14 AIX Operating System Problem Determination Guide
1, m, h
This specifies the low, medium or high starting position
for the new minidisk on the real device. These
attributes are ignored if the -s option is specified.
Use debug to invoke the VRM Debugger when the specified virtual
machine is next dispatched, debug can only be used when VMF is
IPL'ed directly from the fixed disk. See "instf" on page A-23 for a
description of how to install VMF on the fixed disk.
Format:
debug <vmid>
Parameters:
vmid
This is the id, in the range 1 through 255, of the virtual
machine to be debugged.
Example:
If you want to debug virtual machine 2 you enter
debug 2
The VRM Debugger is invoked when VM 2 is dispatched. It is
not invoked immediately. When you get control in the
debugger, it is the VM 2 environment.