IBM RT PC Problem Determination Manual page 220

2-8 AIX Operating System Problem Determination Guide
3. Insert the dump diskette into the diskette drive in location A .
(The top drive if there are two.)
4. Press the
CTRL-ALT-numpad8
key.)
appears in the two-digit while the system verifies the diskette
A c8
is usable. If the diskette is not usable, a
you should remove the bad diskette and insert another.
If the diskette is good,
dump is running. The dump takes approximately 5 minutes to
complete.
When the dump is complete,
display. For any other messages displayed, see "Dump Utility
Messages" on page 2-17.
IS "cO" DISPLAYED?
Press
YES CTRL-ALT-Pause
Go to "Dump Formatter" on page 2-18 and format the
dump diskette.
There may be a hardware problem. Go to
NO
Problem Determination Guide
for problem determination.
If no problem is found before the "Diagnostic Selection"
menu is displayed, run "System Checkout."
keys again. (Use the left
appears. In this case
c5
in the two-digit display indicates the
c9
is displayed in the two-digit
cO
to restart the operating system.
and follow the procedures
ALT
AJZB240
IB M R T