Funtion - HIKVISION DS-2CC5181P-VPIR User Manual

High-definition Vandal-proof Dome Camera· User Manual
2. Move the cursor to VALUE which is used to set the image
brightness from 0 to 15.
3. Move the cursor to CONTRAST which is used to set the image
contrast from 0 to 15.
4. Move the cursor to RETURN, and press menu button to return
to the previous menu.
Note:
The Digital WDR is disabled when the BLC is ON.
SMART IR Settings
Move the cursor to SMART IR, and press confirm to enter the
SMART IR SETUP menu. The SMART IR value can be adjusted
from 0 to 7. It is disabled when the value is 0.

3.2.3 Funtion

SYNC
Support internal and line lock synchronization. When 12V DC is
applied, it supports internal synchronization and it is not
adjustable. When using 24V AC, you can select either internal or
line lock synchronization.
WHITE BALANCE
Move the cursor to WHITE BALANCE, and then press menu
button to select the item from ATW1, ATW2, Auto or Manual.
55