Shutter/Agc Setting - HIKVISION DS-2CC5181P-VPIR User Manual

High-definition Vandal-proof Dome Camera· User Manual

3.1.3 Shutter/AGC Setting

SHUTTER/AGC allows you to adjust the image brightness in
different light conditions.
MANUAL or AUTO mode is selectable for the shutter and AGC.
AUTO Mode:

HIGH LUMINANCE
Move the cursor to Mode in HIGH LUMINANCE, and select
SHUT+AUTO IRIS or AUTO IRIS. SHUT+AUTO IRIS means
adjust the image brightness via shutter and iris. AUTO IRIS means
adjust the image brightness via iris.
Move the cursor to BRIGHTNESS in HIGH LUMINANCE, and
select the value to adjust the brightness.
Note: High luminance means the environmental illumination is
quite high, and the image brightness is controlled by the shutter
and the iris. If you set the lens as Manual in the Lens Settings
interface, only Shutter is available for Mode, which means the
image brightness is controlled via shutter. The value ranges from 0
to 255.

LOW LUMINANCE
Move the cursor to Mode in LOW LUMINANCE. Only AGC is
available, which means the image brightness is adjusted by AGC.
Move the cursor to Brightness in LOW LUMINANCE, and adjust
the AGC value to control the image brightness. ×1.00, ×0.75, ×
0.50 and ×0.25 are selectable
28