Privacy Mask Setting - HIKVISION DS-2CC5181P-VPIR User Manual

High-definition Vandal-proof Dome Camera· User Manual
Note:
The MONITOR AREA frame takes effect only when the BLOCK
DISP panes are included in the MONITOR AREA frame.

3.1.9 Privacy Mask Setting

This feature allows you to cover certain areas which you don't want
to be viewed or recorded. Up to 8 privacy areas are configurable.
Steps:
1. Move the cursor to PRIVACY, and press menu button to enter
the PRIVACY submenu.
2. Select one privacy area in AREA SEL.
3. Set the values of TOP, BOTTOM, LEFT and RIGHT. The size
and the position of the area can be defined by these values.
4. Select the color and the transparency values for the privacy
area. Turn the MOSAIC on if you want to mosaic the privacy
areas.
5. Repeat the steps 1 to step 4 to configure other privacy areas.
MOTION DET
DETECT SENSE ----|---- 111
BLOCK DISP
MONITOR AREA
AREA SEL
TOP ----|---- 128
BUTTOM ----|---- 128
LEFT ----|---- 128
RIGHT ----|---- 128
RETURN
Figure 3-9 MOTION DET
37
OFF
ON
1/4