Language - HIKVISION DS-2CC5181P-VPIR User Manual

High-definition Vandal-proof Dome Camera· User Manual
3). Press up/down/left/right to change the position of camera
ID.
4). Press menu button to exit the CAM ID position setting
interface, and return to the CAM ID menu.
7. Move the cursor to RETURN and press menu button to return
to the previous menu.
SYSTEM INFO
Move the cursor to SYSTEM INFO and press menu button to
check the hardware, software and DSP version. The system
information is used for device maintenance or repair.
CAMERA RESET
Move the cursor to CAMERA RESET, and press menu button to
reset the camera parameters to the factory default settings.

3.2.5 Language

Steps:
SYSTEM INFO
HARDWARE
SOFTWARE
DSP
RETURN
Figure 3-28 System Information
REV1.00
REV1.00.00
REV1.00.00
65