4. In the next screen, read the recommendations. To perform an advanced setup
on the Modem, click Begin Advanced Setup.
5. The "Configuring the Advanced Settings" screen appears. To check all the set-
tings, or if unsure of which settings to modify, select Next. To modify a spe-
cific configuration, click on its name in the menu on the left.
☞
Note: To save changes made in any of the Advanced Settings
screens, click Save and Restart at the bottom of the menu on
the left side of the screen.
WAN IP Address
Address in the "Advanced Settings" screen generates the "
Selecting
WAN IP
Address" screen.
IP
the Modem. There are five ways to do this: Transparent Bridging, Obtain an
Address through
Address through
Actiontec DSL Modem User Manual
Address allows manual set up of the IP address of
WAN IP
o
, Obtain an
PPP
E
, and Specify a Static
DHCP
Address Through
IP
Address.
IP
26
WAN
, Obtain an IP
PPPoA
IP