A Setting Up Static Ip Address; Windows 98 And 98 Se - ActionTec Dual PC Modem R7000M User Manual

Setting Up Static
IP Address
To communicate with the Modem from a computer on the network (to use the
Web Configuration Utility, for example), the user may have to switch the IP
address settings from
Modem are on the same subnet.
To set up static
IP
instructions.
Note: The following procedures are based on the Modem's fac-
tory default
changed, enter the new
address.
IP

Windows 98 and 98 SE

1. From the desktop, click on the Start button in the lower left corner.
2. From the menu that appears, select Settings.
-enabled to static
DHCP
on a computer, select the operating system and follow the
address. If the Modem's
IP
IP
, so that the computer and the
IP
address has been
IP
address when instructed to enter an
35
A