Table of Contents
Advertisement
2. When the "
TCP/IP
User Mode.
3. When the "User Mode" window appears, select Advanced, then click
4. In the "
TCP/IP
list.
5. Select Using
DHCP
6. Ensure the "Use
7. Disregard any addresses in the
when the first connection is made.
8. Click Options and when the "
Ensure the "Load only when needed" option is not checked, then click
9. Close the "
TCP/IP
10. Restart the computer. The
Next, go to "Connecting to the
Actiontec DSL Modem User Manual
" window appears, select Edit from menu bar, then select
" window, select Ethernet from the "Connect via" drop-down
Server from the "Configure" drop-down list.
" option is not checked.
802.3
IP
TCP/IP
" window and when prompted to save changes, click Save.
TCP/IP
."
ISP
Address text boxes. They will be reacquired
Options" window appears, select Active.
settings are configured.
96
.
OK
.
OK
Advertisement
Table of Contents
