Dhcp Server Configuration - ActionTec DSL Modem GT701WG-QW04 User Manual

DHCP Server Configuration

Clicking Next in the "
screen. Change address range and
IP
Beginning IP Address, Ending IP Address
These are the
IP
addresses. Actiontec recommends keeping the factory default settings for these
addresses (192.168.0.2 and 192.168.0.254, respectively).
IP
The beginning and ending
Modem. If the default values are left intact, the Modem supplies a unique IP
address between 192.168.0.2 and 192.168.0.254 to each computer on the net-
work. Note that the first three groups of numbers of the addresses are identical;
this means they are on the same subnet. The
be on the same subnet as the
Modem's address is changed to 10.33.222.1, set the beginning
IP
10.33.222.2, and the ending
DNS (Dynamic or Static)
This is the type of
er information, select the type here. If not, leave as is.
DNS Server 1
The primary
DNS
information, enter it here. If not, leave the text box intact.
DNS Server 2
The secondary
DNS
server information, enter it here. If not, leave the text box intact.
Actiontec DSL Modem User Manual
Server" screen generates the "
DHCP
DNS
addresses at which the
addresses define the
IP
address range it generates. For instance, if the
IP
address to 10.33.222.254.
IP
server provided by the
DNS
server provided by the
provided by the
DHCP
server information here.
server starts and stops assigning
DHCP
address range of the
IP
address of the Modem must
IP
. If the
ISP
. If the
ISP ISP
. If the provided secondary
ISP ISP
38
Server Settings"
address to
IP
provided
ISP DNS
provided server
DNS
DNS
IP
serv-