Table of Contents
Advertisement
There should be an entry for
Additionally, the "
(with "
" defining a range from 2 though 255).
X
If the Ethernet adapter is showing an incorrect
sets all values back to 0 (zero). Then, click Renew (this process may take a few
seconds). The renewed
If an error occurs, or the
192.168.0.
network, contact the
X
If running Windows 98
s
Start, Run, enter
in the "Open" text box, then press OK. A "
ing cursor (prompt). Enter
at the prompt, then press Enter on the keyboard.
The
address of the Ethernet adapter should appear in the
IP
Ensure the
address is on the 192.168.0.
IP
range from 2 though 255).
If the Ethernet adapter is showing an incorrect
at the prompt (note the space before the forward slash), then press Enter
on the keyboard, which sets all values back to 0 (zero). Next, enter
at the prompt (note the space before the forward slash), then press Enter
on the keyboard (this process may take a few seconds). The renewed
should be on the 192.168.0.
If an error occurs, or the
192.168.0.
network, contact the
X
Ensure the browser is not set to "Never dial a connection" and there are no
s
previous
settings.
LAN
To check this, go to Start, Settings, Control Panel. In the Control Panel,
double-click Internet Options. When the "Internet Properties" window
appears, ensure the "Never dial a connection" option is not activated, then
Settings. When the "Local Area Network (
click
LAN
appears, ensure no settings are activated. If there are settings activated, deac-
tivate them.
Shutdown and restart the computer. After the computer restarts, unplug the
s
Power cord from the Modem and plug it back in. When the lights glow solid
green, try accessing the Internet.
Actiontec DSL Modem User Manual
address, Subnet Mask, and Default Gateway.
IP
Address" entry should be on the 192.168.0.
IP
address should be on the 192.168.0.
IP
address renews with an address outside the
IP
ISP
or Me, check the computer's
SE
CMD
ipconfig
ipconfig /release
ipconfig /renew
network.
X
address renews with an address outside the
IP
ISP
60
address, click Release, which
IP
immediately
TCP
" window appears, with a blink-
DOS
network (with "
X
address, enter
IP
immediately.
LAN
network
X
network.
X
/
settings. Select
IP
window.
DOS
" defining a
X
address
IP
) Settings" window
Advertisement
Table of Contents
