Hands Free Mode; Slave Mode - Pandora Pandect X1100 Manual

Controlling security mode
To arm or disarm a security system while in the range of radio
channel (about 5 meters from the motorcycle) push a button on the
immobilizer tag. The system will communicate dialog security codes
(AES-128 encryption) in 2.4 GHz range on one of 125 channels and
your security system will be armed or disarmed. Special arming/
disarming algorithm is available for motorcycles. Arming is performed
by pressing the clutch lever when ignition is switched off; disarming
is performed by pressing the clutch lever when the system is armed.
The presence of the tag in radio the zone is controlled when arming/
disarming is performed. Arming/disarming using the clutch lever is
not allowed when the tag is not in the radio zone.

Hands free mode

System allows for programmable
engine is running, simply move immobilizer tag away from the motorcycle outside of the 2.4 GHz
radio channel radius (more than 10 meters). To disarm the system move the tag back into the radius.

Slave mode

In this mode original motorcycle security system can be controlled via CAN or analog inputs. When
arming and disarming motorcycle's original security system, Pandect X-1100 will arm and disarm too.
This does not require an immobilizer tag to be present in range, however, the engine will be blocked if
there will be an attempt to drive away without a tag present.
8
H F
arming/disarming. To arm the system when the
ANDS REE
Motorcycle service and security system Pandect X-1100
LED indicator
Control button