Warranty; Warnings, Compliance, And Legal Notices - Stern Pinball WHOA NELLIE! BIG JUICY MELONS Service And Operation Manual

7. WARRANTY

Stern Pinball machines are assembled in Melrose Park, Illinois, USA;
each pinball machine has unique characteristics that make it a one-of-
a-kind American-made product. Each machine will have variations in
appearance resulting from differences in the machine's particular wood
parts, individual silk screened art and mechanical assemblies. Stern
Pinball has inspected each game element to insure it meets stringent
quality and playability standards.
STERN PINBALL INC LIMITED WARRANTY
Stern Pinball Inc ('SELLER') warrants only to the initial purchaser of its
products that the items listed below are free from defects in material
and workmanship under normal use and service for the warranty
period specified:
‹ Printed circuit boards (game logic): 2 months
‹ Dot Matrix Display boards: 9 months
No other parts of seller's product are warranted. Warranty periods are
effective from the initial date of shipment from seller to its authorized
distributors.
Seller's sole liability shall be, at its option, to repair or replace products
which are returned to seller during the warranty periods specified,
provided:
1. Seller is notified promptly upon discovery by purchaser that
stated products are defective.
2. Such products are properly packaged and then returned
freight prepaid, to seller's plant.
This warranty does not apply to any parts damaged during shipment
and/or due to improper handling, or due to improper installation or
usage, or alteration. In no event shall the seller be liable for any antic-
ipated profits, loss of profits, loss of use, accidental or consequential
damages, or any other losses incurred by the customer in connection
with the purchase of a Stern Pinball Inc Product.
WARRANTY DISCLAIMER
Except as specifically provided in a written contract between seller and
purchaser, there are no other warranties, express or implied, including
any implied warranties of merchantability or fitness for a particular
purpose.
7.1 WARNINGS, COMPLIANCE, AND
LEGAL NOTICES
500-55D7-01 Whoa Nellie Big Juicy Melons
For safety and reliability, substitute parts and equipment modifications
are not recommended (and may void any warranties).
Use of non-Stern® Pinball Inc. parts or modifications of game circuitry,
may adversely affect game play, or may cause injuries.
Transport pinball games with hinged backbox in the down
position only! Always take great care when servicing any
game. Always read the service manual before replacing
or servicing components. SUBSTITUTIONS OF PARTS
OR EQUIPMENT MODIFICATIONS may void FCC Type
acceptance.
Always disconnect the line voltage before servicing. Some parts may
still hold current when unplugged.
WARNING
MANUFACTURED UNDER LICENSE BY STERN PINBALL, INC.
™ & © 2015 WHIZBANG PINBALL LLC. ALL RIGHTS RESERVED.
This equipment generates, uses, and can radiate radio frequency
energy, and if not installed and used in accordance with
the instructions manual, may cause interference to radio
communications. It has been tested and found to comply
with the limits for a class a computing device pursuant
to SUBPART J OF PART 15 OF FCC RULES, which are
designed to provide reasonable protection against such
interference when operated in a commercial environment. Operation
of this equipment in a residential area is likely to cause interference in
which case the user at his own expense will be required to take what-
ever measures may be required to correct the interference.
RF INTERFERENCE NOTICE: Cable harness placements and ground
strap routing on this game have been designed to keep RF radiation
and conduction within levels accepted by the FCC rules. To maintain
these levels, reposition harnesses and reconnect ground straps to their
original placements, if they become disconnected during maintenance.
"The appliance has to be placed in a horizontal position."
"This appliance is not to be cleaned by a Water Jet."
603335-7.12.1 (i) "Do not locate this appliance in an
area where a Water Jet is used." (ii) "Do not clean this
appliance with a Water Jet." 60335-7.12.5 (b) If the
supply cord is damaged, it must be replaced by the
manufacturer, its service agent or similarly qualified
persons in order to avoid a hazard.
IEC 60825-1 2ND EDITION AND WAS ISSUED IN 2007
NOTICES
THIS DOCUMENT AND THE DATA DISCLOSED HERE-
IN OR HEREWITH IS NOT TO REPRODUCED (EXCEPT WHERE NOT-
ED), USED OR OTHERWISE DISCLOSED IN WHOLE OR IN PART TO
ANYONE WITHOUT WRITTEN CONSENT OF STERN® PINBALL, INC.
WARNING: PRODUCTS IN THIS MANUAL, THE COMPANY NAME
AND DEVICES AND THE DESIGN OF THE MANUAL ITSELF, ARE PRO-
TECTED BY FEDERAL PATENTS (AND PATENTS PENDING), DESIGN
REGISTRATIONS, TRADEMARKS AND COPYRIGHTS. ACTION WILL
BE TAKEN IN THE EVENT OF INFRINGEMENT OR IMITATION. THE
RIGHT IS RESERVED TO CHANGE SPECIFICATIONS WITHOUT PRI-
OR NOTICE.
© 2015 Manufactured by Stern® Pinball. Inc. Icon Designs, ToPS™
Logo, Bump N' Win™ Logo & all related indicia are trademarks of
Stern® Pinball. Inc. All Rights Reserved. Manufactured in the USA.
"Multiball" is a registered trademark of Williams Electronics Games,
Inc. Used by permission.
PCB Schematics © 1995-2015 by CES (Creative Electronics & Soft-
ware, Inc,) where noted,
WHOA NELLIE! MANUAL #780-50D7-00
WARRANTY
49