International Cable Connections - Stern Pinball WHOA NELLIE! BIG JUICY MELONS Service And Operation Manual

FIRST-TIME SETUP CONTINUED

1.7 INTERNATIONAL CABLE CONNECTIONS

Making cable connection from base game to backbox
Make sure the backbox has been properly attached to the base game
Reach into the base cabinet through the large rectangular hole in the backbox and retrieve the bundle of cables. Pull the
bundle into the back box
4 Pin
6 Pin
12 Pin
3 Pin
Connect the four cables from the base cabinet to the matching cables in the backbox, these are the white connectors.
There is: a 3 pin plug, 4 pin plug, 6 pin plug, and 12 pin plug.
There are two black RJ 45 cables one gets connected to the CPU the other to the 4-coil driver circuit board.
The ribbon cable gets connected to the CPU
The ground strap to the stud as shown
MANUFACTURED UNDER LICENSE BY STERN PINBALL, INC.
™ & © 2015 WHIZBANG PINBALL LLC. ALL RIGHTS RESERVED.
Display Cable
RJ45 Cables
Display Cable Ground Strap
Back Box Ground Strap
Dress display cable in
cable clamps as shown
Remove nut with 11/32 driver
Connect display cable ground strap
Replace nut
RJ45 cables go here
Remove nut with 11/32 driver
Connect ground strap
Replace nut
Cables from base game pulled
up through hole in back box
WHOA NELLIE! MANUAL #780-50D7-00
GAME SETUP
756-6238-01
11