Table of Contents
Advertisement
GUARDIANS OF
SERVICE AND OPERATION MANUAL
WARNING
IMPORTANT HEALTH WARNING: PHOTOSENSITIVE SEIZURES - A very small percentage of people may experience a seizure when exposed to certain visual images, in-
cluding flashing lights or patterns. Even people with no history of seizures of epilepsy may have an undiagnosed condition that can cause "photosensitive epileptic seizures"
due to certain visual images, flashing lights or patterns. Symptoms can include lightheadedness, altered vision, eye or face twitching, jerking or shaking of arms or legs,
disorientation, confusion, momentary loss of awareness, and loss of consciousness or convulsions that can lead to injury from falling down or striking nearby objects.
IMMEDIATELY STOP PLAYING AND CONSULT A DOCTOR IF YOU EXPERIENCE ANY OF THESE SYMPTOMS.
ATTENTION! IMPORTANT WARRANTY INFORMATION
The electronics system, node network architecture, mechanical devices and associated software control systems in this pinball machine are designed to work with genuine
Stern Pinball accessories and devices.
Installation of non-authorized accessories, lamps, LED's, motors or other devices or modification of electro-mechanical devices may damage the system and will void your
warranty.
Stern Pinball machines are assembled in Elk Grove Village, Illinois, USA. Stern Pinball has inspected each game element to ensure it meets our quality standards.
Each pinball machine has unique characteristics that make it a one-of-a-kind American made product. Each will have variations in appearance resulting from differences
in the machine's particular wood parts, individual printed art and mechanical assemblies. No playfield is perfectly flat and varies depending on the season. Game play will
result in playfield dimpling as the harder steel ball contacts the wood and coating; over time multiple dimples will blend to make them less noticeable. Normal plastic insert
crazing (tiny stress cracks) and ghosting (small cloudy areas around insert edges) are often seen in pinball machines, due to a combination of plastic mold stress, pushing of
inserts into purposely undersized holes, and heating and breaking of inserts' plastic "skin" when the playfield field is sanded.
© MARVEL
Games configured for North America operate on 60 cycle electricity only. These games will not operate in countries with 50 cycle electricity (Europe, UK, Australia).
THE GALAXY
GUARDIANS OF THE GALAXY LE #500-55L6-01
GUARDIANS OF THE GALAXY PREMIUM #500-55L7-01
1-800-KICKERS - parts.service@sternpinball.com
www.sternpinball.com - facebook.com/sternpinball
MANUAL #780-50L6-00
Advertisement
Table of Contents
Related Manuals for Stern Pinball GUARDIANS OF THE GALAXY PREMIUM
Summary of Contents for Stern Pinball GUARDIANS OF THE GALAXY PREMIUM
- Page 1 Stern Pinball machines are assembled in Elk Grove Village, Illinois, USA. Stern Pinball has inspected each game element to ensure it meets our quality standards. Each pinball machine has unique characteristics that make it a one-of-a-kind American made product. Each will have variations in appearance resulting from differences in the machine’s particular wood parts, individual printed art and mechanical assemblies.
-
Page 2: Table Of Contents
TABLE OF CONTENTS Setup and Moving ........3 5.11 Slingshot Assembly..........44 5.12 Flipper Assembly, Left ........45 First-Time Setup Instructions ....... 3 5.13 Flipper Assembly, Right ........45 Adjustments Menu ..........6 5.14 Pop Bumper Assembly ........46 Transporting the Game ........7 5.15 1-Bank Drop Target Assembly ...... -
Page 3: Setup And Moving
MOVE AND MANEUVER THE SETUP INSTRUCTIONS TOOLS REQUIRED GAME. USE PROPER MOVING EQUIPMENT EXTREME Your brand new Stern Pinball Machine is • 5/8” Socket Wrench CARE WHILE HANDLING. STERN carefully packed for safety and security. • Utility Knife PINBALL MACHINES... - Page 4 SETUP AND MOVING FIRST-TIME SETUP CONTINUED 15. Cut nylon strapping and remove 18. Open the front coin door. 21. Store the backbox keys, if desired, protective strap corner guards. 19. Reach into the game and remove on the metal hook located in the 16.
- Page 5 SETUP AND MOVING FIRST-TIME SETUP CONTINUED SPIKE PINBALL SOFTWARE 30. If pinballs were already installed into the lower ball trough, remove them before lifting the playfield. UPDATE INSTRUCTIONS 31. Grasp the lower arch between the flippers, and firmly but gently pull directly up to raise the playfield 8 to 12 Obtain game software update file (filename ends inches.
-
Page 6: Adjustments Menu
SETUP AND MOVING 1.2 ADJUSTMENTS MENU STANDARD ADJUSTMENTS STANDARD ADJUSTMENT #1 appears with the adjustment name flashing. While the adjustment name is flashing press [<] [>] to move between adjustments. Perform the below steps to review the adjustments. To change the adjustment setting press SELECT. While the Enter the Service Menu, then enter the Standard Adjustments adjustment setting is flashing, press [<] [>] repeatedly until Menu. -
Page 7: Transporting The Game
SETUP AND MOVING 1.3 TRANSPORTING THE GAME CAUTION When transporting the game, such as in the back of a truck or with a hand truck, the game’s backbox must be secured to prevent damage to the side rails. NEVER TRANSPORT THE GAME IN A MOVING VEHICLE WITH THE BACKBOX RAISED! TWO PEOPLE 1. -
Page 8: Maintenance
Flipper rebuild kits, Left and Right (500-6307-10,-00) OVERHAUL MAINTENANCE - (5000 GAMES) Guardians of the Galaxy LE Playfield Plastics Kit 803-5000-L6 Guardians of the Galaxy Premium Playfield Plastics Kit 803-5000-L7 Guardians of the Galaxy LE Playfield Decals Kit 802-5000-L6 • Verify latest game software is installed... -
Page 9: Spike System And Node Guide
48V system power. SPIKE standard I/O nodes are low-power nodes that read switch inputs and output to A Stern Pinball machine based on the SPIKE system will have at standard-brightness LEDs. Standard I/O nodes use the node bus... -
Page 10: Spike Node Programming
SPIKE SYSTEM AND NODE GUIDE SPIKE SYSTEM AND NODE GUIDE CONTINUED 2.5 SPIKE NODE PROGRAMMING INPUT/OUTPUT PROTECTIONS The SPIKE nodes are smart nodes that have on-board pro- SPIKE features built-in short-circuit, static electricity, and other cessors and run embedded code. The nodes are programmed protections to maximize reliability. -
Page 11: Light, Switch, And Driver Reference
LIGHT, SWITCH, AND DRIVER REFERENCE NODE BOARD ID INSTRUCTION SHEET 3. LIGHT, SWITCH, AND DRIVER REFERENCE PLAYFIELD FRONT PREMIUM NODE 8 NODE 8a BACKBOX NODE 0 NODE 10b NODE 10a CN22 CN11 CPU NODE 0 NODE 8b NODE 9a NODE 10 CN13 CN14 NODE 11a... -
Page 12: Driver Reference
SPIKE SYSTEM AND NODE GUIDE 3.2 DRIVER REFERENCE Name Node Connector Ret. Ret. Wire Voltage V+ V+ Color Location Type Address Part Number Trough ORG GRY GRY ORG Playfield Coil - 27-1500 8-DR-1 090-5004-ND Auto Plunger ORG WHT 48V GRY ORG Playfield Coil - 23-800 8-DR-4 090-5001-ND... - Page 13 SPIKE SYSTEM AND NODE GUIDE DRIVER REFERENCE CONTINUED Figure 3.2.1. Playfield driver locations (top view). GUARDIANS OF THE GALAXY LE / PREMIUM MANUAL 500-55L7-01 MARVEL.COM © MARVEL...
-
Page 14: Switch Reference
SPIKE SYSTEM AND NODE GUIDE 3.3 SWITCH REFERENCE Name Node Node Conn. Input Input Wire Ground Wire Location Type Address Part Number Left Outlane CN11 LGN RED 11-12 BLK ORG Playfield Rollover 8-SW-17 500-9935-04 Left Return Lane-Left CN11 LGN ORG 11-12 BLK ORG Playfield... - Page 15 SPIKE SYSTEM AND NODE GUIDE SWITCH REFERENCE CONTINUED Name Node Node Conn. Input Input Wire Ground Wire Location Type Address Part Number Groot Trough 1 CN13 PNK BRN BLK GRY Playfield Opto 9-SW-1 520-7064-00 rx 520-7065-00 tx Groot Trough 2 CN13 PNK RED BLK GRY...
- Page 16 SPIKE SYSTEM AND NODE GUIDE SWITCH REFERENCE CONTINUED Figure 3.3.1. Playfield switch locations (top view). Continued on next page... GUARDIANS OF THE GALAXY LE / PREMIUM MANUAL 500-55L7-01 MARVEL.COM © MARVEL...
- Page 17 SPIKE SYSTEM AND NODE GUIDE SWITCH REFERENCE CONTINUED Name Node Node Conn. Input Input Wire Ground Wire Location Type Address Part Number Tournament Start GRY WHT BLK WHT Cabinet Micro 1-SW-12 180-5174-00 Button Left Coin PNK BRN Cabinet Micro 1-SW-16 Right Coin PNK ORG Cabinet...
-
Page 18: Light Reference
SPIKE SYSTEM AND NODE GUIDE 3.4 LIGHT REFERENCE ID Name Node Node Conn. Ret. Ret. Wire Src. Src. Wire Location Type Light Address Part Number Ext. Color Coin Enable BLK GRY GRY RED Coin Door Digital Out 1-LP-0 Start Button YEL BRN Cabinet Feature... - Page 19 SPIKE SYSTEM AND NODE GUIDE LIGHT REFERENCE CONTINUED ID Name Node Node Conn. Ret. Ret. Wire Src. Src. Wire Location Type Light Address Part Number Ext. Color Save Xandar-BLU LED1 Playfield Feature 10-LP-26 520-7080-00 Groot Multiball-Bottom-RED 10 LED6 Playfield Feature 10-LP-31 520-7080-00 Groot Multiball-Bottom-GRN 10 LED6...
- Page 20 SPIKE SYSTEM AND NODE GUIDE LIGHT REFERENCE CONTINUED Figure 3.4.1. Playfield light locations (top view). Continued on next page... GUARDIANS OF THE GALAXY LE / PREMIUM MANUAL 500-55L7-01 MARVEL.COM © MARVEL...
- Page 21 SPIKE SYSTEM AND NODE GUIDE LIGHT REFERENCE CONTINUED ID Name Node Node Conn. Ret. Ret. Wire Src. Src. Wire Location Type Light Address Part Number Ext. Color 103 Left Orbit X-RED LED6 Playfield Feature 8-LP-43 520-7077-00 104 Left Orbit X-GRN LED6 Playfield Feature...
- Page 22 SPIKE SYSTEM AND NODE GUIDE LIGHT REFERENCE CONTINUED ID Name Node Node Conn. Ret. Ret. Wire Src. Src. Wire Location Type Light Address Part Number Ext. Color 158 Lock 1-RED LED11 - Playfield Feature 11-LP-44 520-7076-00 159 Lock 1-GRN LED11 - Playfield Feature 11-LP-45 520-7076-00...
- Page 23 SPIKE SYSTEM AND NODE GUIDE LIGHT REFERENCE CONTINUED ID Name Node Node Conn. Ret. Ret. Wire Src. Src. Wire Location Type Light Address Part Number Ext. Color 205 Right Scoop Arrow-GRN LED15 - Playfield Feature 10-LP-19 520-7079-00 206 Right Scoop Arrow-BLU LED15 - Playfield Feature...
- Page 24 SPIKE SYSTEM AND NODE GUIDE LIGHT REFERENCE CONTINUED ID Name Node Node Conn. Ret. Ret. Wire Src. Src. Wire Location Type Light Address Part Number Ext. Color 256 Orb-RED RED VIO Playfield Feature 9-LP-45 520-5333-00 257 Orb-GRN GRN VIO Playfield Feature 9-LP-46 520-5333-00...
-
Page 25: Motor Reference
SPIKE SYSTEM AND NODE GUIDE 3.5 MOTOR REFERENCE Name Node Node Conn. Ret. Ret. Src. Src. Location Type Light Address Part Number Ext. Wire Wire Color Motor A Enable-Orb Playfield Motor 9-LP-48 520-6996-00 Motor A Control 1A-Orb Playfield Motor 9-LP-49 520-6996-00 Motor A Control 2A-Orb Playfield... -
Page 26: Electronic Pinouts And Schematics
ELECTRONIC PINOUTS AND SCHEMATICS 4. ELECTRONIC PINOUTS AND SCHEMATICS 4.1 SPIKE-2 CPU NODE 0 509-1003-01 DIRECT SWITCH MAPPING (CN25) The coin-door diagnostic switches are connected directly to the CPU node via the Cabinet Node. Note that both the CPU and Cabinet nodes are required for diagnostic switch operation. - Page 27 ELECTRONIC PINOUTS AND SCHEMATICS SPIKE-2 CPU NODE 0 CONTINUED AUDIO PINOUTS Type Pin Description Minimum Impedance Power (RMS) .156" 5-pin Speaker Right Ground (-) 4 Ohms Header Speaker Right (+) 4 Ohms Speaker Left Ground (-) 4 Ohms Speaker Left (+) 4 Ohms .100"...
-
Page 28: Cabinet Node 1
ELECTRONIC PINOUTS AND SCHEMATICS 4.2 CABINET NODE 1 520-6967-72 Type Description Wire Color .100" 8-Pin Header Univer- sal Card Link Coin 1 Meter 1 Notch Coin Enable Ticket Enable Ground .100" 5-Pin Header low Ground ticket Ticket Low sw. Ticket Low 5V Out CN10 .100"... -
Page 29: Lower Playfield 48V Driver Pinout Node 8
ELECTRONIC PINOUTS AND SCHEMATICS 4.3 LOWER PLAYFIELD 48V DRIVER PINOUT NODE 8 520-7017-72 CN11 .100" 12-Pin Header 8-SW-26 Switch 8-SW-27 Switch 8-SW-17 Switch LGN-RED 8-SW-18 Switch LGN-ORG 8-SW-19 Switch LGN-YEL 8-SW-20 Switch LGN-BLU 8-SW-21 Switch LGN-VIO 8-SW-22 Switch 8-SW-23 Switch Ground BLK-ORG Ground... - Page 30 ELECTRONIC PINOUTS AND SCHEMATICS 4.4 MID UPPER PLAYFIELD 48V DRIVER PINOUT NODE 9 520-7017-72 CN11 .100" 12-Pin Header 9-SW-26 Switch TAN-BLK 9-SW-27 Switch TAN-RED 9-SW-17 Switch TAN-ORG 9-SW-18 Switch TAN-YEL 9-SW-19 Switch TAN-GRN 9-SW-20 Switch TAN-BLU 9-SW-21 Switch TAN-VIO 9-SW-22 Switch 9-SW-23 Switch TAN-WHT Ground...
-
Page 31: Through Serial Opto Receiver Extension 8A
ELECTRONIC PINOUTS AND SCHEMATICS 4.5 THROUGH SERIAL OPTO 4.6 LEFT LOWER LED BOARD 8B RECEIVER EXTENSION 8A 520-7081-00 520-7001-00 Type Description Wire Color CN1 .100" 7-Pin Header 1 Ground MISO Output Data VIO-BLK MOSI Input Data SCK Serial Clock VIO-RED RCK Register Clock VIO-ORG +5 VDC IN... -
Page 32: Left Upper Led Board 8C
ELECTRONIC PINOUTS AND SCHEMATICS 4.7 LEFT UPPER LED BOARD 8C 4.8 RIGHT UPPER LED BOARD 9A 520-7077-00 520-7078-00 Type Description Wire Color .100" 7-Pin Header Ground MISO Output Data VIO-BLK MOSI Input Data VIO-BRN SCK Serial Clock VIO-RED RCK Register Clock VIO-ORG +5 VDC IN .100"... -
Page 33: Serial Motor Driver Board 9B
ELECTRONIC PINOUTS AND SCHEMATICS 4.9 SERIAL MOTOR DRIVER 4.10 RIGHT LOWER LED BOARD 10A BOARD 9B 520-7079-00 520-6996-00 Type Description Wire Color .100" 7-Pin Header Ground MISO Output Data VIO-BLK MOSI Input Data VIO-BRN SCK Serial Clock VIO-RED RCK Register Clock VIO-ORG Type Description... -
Page 34: Lower Led Board 10B
ELECTRONIC PINOUTS AND SCHEMATICS 4.11 LOWER LED BOARD 10B 4.12 CENTER UPPER LED BOARD 11A 520-7080-00 520-7076-00 Type Description Wire Color .100" 7-Pin Header Ground Type Description Wire Color MISO Output Data VIO-BLK .100" 3-Pin Header 1 +5 VDC MOSI Input Data VIO-BRN SCK Serial Clock VIO-RED... -
Page 35: Spi Core Playfield Node 10
ELECTRONIC PINOUTS AND SCHEMATICS 4.13 SPI CORE PLAYFIELD NODE 10 4.15 TROUGH SERIAL OPTO EMITTER 520-6976-72 520-7064-00 Type Description Wire Color .100" 6-Pin Header Ground BLK-GRY Type Description Wire Color MISO Output Data PNK-BRN Address DIP Node 10 - OFF-ON- OFF-OFF MOSI Input Data PNK-RED... -
Page 36: Playfield 48V 4 Coil Pinout Node 11
ELECTRONIC PINOUTS AND SCHEMATICS 4.17 PLAYFIELD 48V 4 COIL PINOUT NODE 11 520-6998-72 CN15 .100" 14-Pin Header 11-SW-4 Switch Return GREEN ORANGE BLACK NEUTRAL 11-SW-5 Switch Return 520-6998-72 CN11 11-SW-6 Switch Return 4 Coil NODE 11-SW-7 Switch Return 11-SW-8 Switch Return CN14 CN13 CN16... -
Page 37: Power Distribution Board
ELECTRONIC PINOUTS AND SCHEMATICS 4.18 POWER DISTRIBUTION BOARD 4.19 POWER PLUG WIRING 520-5343-01 CAUTION TO MAINTAIN SAFETY, GROUND WIRE FROM LINE FILTER IS TO BE MOUNTED FIRST ON GROUNDING STUD AND SECURED WITH NUT. ALL OTHER GROUNDS MAY THEN BE ATTACHED TO GROUNDING STUD. -
Page 38: Parts Reference
PARTS REFERENCE 5. PARTS REFERENCE 5.1 PLAYFIELD RUBBER PARTS RUBBER O-RINGS Size (ID) Size (OD) Durometer Color Part Number 3/16" Black 545-5348-01 5/16" Black 545-5348-02 3/4" Black 545-5348-04 1" Black 545-5348-05 2" Black 545-5348-08 7/16" Black 545-5348-17 Figure 5.1.2. Rubber o-ring part numbers and usage. ID: Inner Diameter, OD: Outer Diameter, Durometer: Higher number is firmer, less bounce, and more durable. -
Page 39: Playfield Assemblies, Top
PARTS REFERENCE 5.3 PLAYFIELD ASSEMBLIES, TOP Part Number Description 545-5995-02 Bottom Arch Assembly 755-51L5-12-Y Instruction Card 755-5400-02-Y Coin Card (USA) 260-5000-00 Pinballs 500-6815-00 Bubble Level Assembly 545-5409-01 Light Reflector 511-7655-0X Spinner 511-7506-03 Electric Gate 511-5096-00 Electric Gate 545-9981-01 Groot Head (Drilled) 535-8385-00 Welded Hanger Bracket Figure 5.3.1. -
Page 40: Playfield Assemblies, Bottom
PARTS REFERENCE 5.4 PLAYFIELD ASSEMBLIES, BOTTOM Part Number Description 520-7017-72 Core-Driver Node 8 Board 520-7080-00 Lower LED Board 10b 520-7081-00 Left Lower LED Board 8b 520-7079-00 Right Lower LED Board 10a 520-7078-00 Right Upper LED Board 9a 520-7077-00 Left Upper LED Board 8c 520-7076-00 Center Upper LED Board 11a 520-6996-00... -
Page 41: Backbox Parts
PARTS REFERENCE 5.5 BACKBOX PARTS LCD BACKBOX LCD BACKBOX 5009995-XX DOMESTIC VERSION 500-9995-XX Figure 5.5.1. Backbox external assemblies and components. Figure 5.5.2. Backbox internal assemblies and components. EXTERNAL INTERNAL Part Number Description Part Number Description 660-5052-00 Backglass 509-1003-01 CPU Node Board 830-8426-L6 Mirror Backglass [LE] 520-5343-01... -
Page 42: Cabinet Parts
PARTS REFERENCE 5.7 CABINET PARTS Part Number Description 525-6011-00 Cabinet (Plunger & Two Buttons) 535-5989-00 Slide & Pivot Bracket - Left Side 535-5990-00 Slide & Pivot Bracket - Right Side 515-7792-00 Cabinet Playfield Locking Bar 500-2464-81 Front Molding Assembly - Goldtastic [LE] 500-2464-00 Front Molding Assembly - Wrinkle Black [Premi- 535-7999-81L Pivot Hinge, Left - Goldtastic [LE]... -
Page 43: Ball Shooter Assembly
PARTS REFERENCE 5.9 AUTO LAUNCH ASSEMBLY 5.8 BALL SHOOTER ASSEMBLY 500-9818-01 500-6146-00-07 Part Number Description 535-5067-02 Housing Assembly 266-5001-07 Compressed Spring (Long) - Orange 242-5014-00 Washer 3/8 ID x 5/8 OD x 1/16 515-6557-00 Rod Assembly 266-5010-00 Compressed Spring (Short) 270-5012-00 Retaining Ring, 3/8"... -
Page 44: Ball Trough Assembly
PARTS REFERENCE 5.11 SLINGSHOT ASSEMBLY 5.10 BALL TROUGH ASSEMBLY 500-9920-01 500-9820-00 Part Number Description 515-7811-00 MAIN BRKT. BALL TROUGH 515-7812-00 COIL BRACKET, BALL TROUGH Part Number Description 237-5975-04 SCREW, 8-32 X 1/4" HWH SWAGE SERR 515-5339-01 SLINGSHOT BRACKET ASSEMBLY 266-5020-00 COMPRESSION SPRING-CONICAL 090-5044-ND COIL 26-1200 - NO DIODE... -
Page 45: Flipper Assembly, Left
PARTS REFERENCE 5.12 FLIPPER ASSEMBLY, LEFT 5.13 FLIPPER ASSEMBLY, RIGHT 500-6543-14-ND 500-6543-04-ND Part Number Description Part Number Description 515-6617-01 FLIPPER BASE PLATE LEFT KIT W/ 515-6617-00 FLIPPER BASE PLATE RIGHT KIT W/ BRACKET MOUNT HARDWARE BRACKET MOUNTING HARDWARE 515-6308-01 COIL STOP BRACKET 515-6308-01 COIL STOP BRACKET 180-5149-00... -
Page 46: Pop Bumper Assembly
PARTS REFERENCE 5.14 POP BUMPER ASSEMBLY 516-6784-XX Part Number Description 515-6459-01L BUMPER/RING TOP ASSY, W/ LED 1 515-6459-04-ND BUMPER BOTTOM ASSY, NO DIODE ID Part Number Description 500-9934-01 POP BUMPER SWITCH ASSY-2 - LUG-LEFT 240-5005-00 6-32 NYLON STOP NUT 090-5044-ND COIL - 26-1200 10 237-5976-01 #6-32 X 1/4"... -
Page 47: 1-Bank Drop Target Assembly
1-BANK DROP TARGET ASSEMBLY DUAL-TARGET ASSEMBLY - GENERIC GUARDIANS OF THE GALAXY 511-9979-00 500-1083-01-L6 PARTS REFERENCE GUARDIANS OF THE GALAXY - ATTACH DECAL 830-1016-29 5.15 1-BANK DROP TARGET 5.16 DUAL TARGET ASSEMBLY QTY. ITEM NO. PART NUMBER DESCRIPTION QTY. ASSEMBLY 511-9979-00 535-0699-00 FUEL TARGET BRACKET... -
Page 48: Rocket Raccoon Coil Assembly
PARTS REFERENCE ROCKET RACCOON REFERENCE ASSEMBL 5.18 ROCKET RACCOON 5.17 ROCKET RACCOON COIL GUARDIANS OF THE GALAXY LE / PREMIUM REFERENCE ASSEMBLY ASSEMBLY ROCKET RACCOON COIL ASSEMBLY 500-2466-00 GUARDIANS OF THE GALAXY LE / PREMIUM 500-2466-00 QTY. ITEM NO. PART NUMBER DESCRIPTION QTY. -
Page 49: Orb Motor Assembly
PARTS REFERENCE ORB SCISSOR ASSEMBLY GUARDIANS OF THE GALAXY LE / PREMIUM 511-9978-00 5.19 ORB MOTOR ASSEMBLY 5.20 ORB SCISSOR ASSEMBLY ITEM NO. PART NUMBER DESCRIPTION QTY. 515-1842-00 ASSEMBLY, ORB PIVOT BRACKET, FURRY HATS LE 511-9977-00 511-9978-00 242-5028-00 WASHER NYLON .265 X .688 X .063 ORB MOTOR ASSEMBLY 535-1671-00 BRACKET, ORB RIGHT SCISSOR, FURRY HATS LE... -
Page 50: Orb Arm Guide Assembly
ORB ARM GUIDE ASSEMBLY GUARDIANS OF THE GALAXY LE / PREMIUM PARTS REFERENCE 511-1082-00 5.21 ORB ARM GUIDE ASSEMBLY 5.23 EJECT VUK QTY. T, FURRY HATS LE RY HATS LE 511-1082-00 500-1050-00 LOCTITE 243 LOCTITE 243 Part Number Description 535-1765-00 BRACKET, ORB GLIDE MOUNT, GOTG ITEM # QTY PART #... -
Page 51: Left Ramp Assembly
QTY. ITEM NO. PART NUMBER DESCRIPTION QTY. 511-7908-00 ASSEMBLY, RIGHT RAMP ENTRANCE, FURRY HATS LE 511-7909-00 ASSEMBLY, RIGHT RAMP EXIT, FURRY HATS PARTS REFERENCE 535-0546-00 RAMP BRIDGE PLATE 237-6151-00 SCREW, 4-40 X 5/16" PFH U/C MS 5.24 LEFT RAMP ASSEMBLY 5.26 RIGHT RAMP ASSEMBLY 500-1069-00 500-1070-00... -
Page 52: Left Ramp Entrance Assembly
RIGHT RAMP ENTRANCE GUARDIANS OF THE GALAXY LE / PREMIUM PARTS REFERENCE LEFT RAMP ENTRANCE 511-7908-00 GUARDIANS OF THE GALAXY LE / PREMIUM 511-7906-00 5.28 LEFT RAMP ENTRANCE 5.29 RIGHT RAMP ENTRANCE QTY. ASSEMBLY ASSEMBLY 511-7906-00 511-7908-00 ITEM NO. PART NUMBER DESCRIPTION QTY. -
Page 53: Ball Guide #2 & Opto
BALL GUIDE #7 & OPTO BALL GUIDE #8 & OPTO GUARDIANS OF THE GALAXY GUARDIANS OF THE GALA 511-7900-07 511-7900-08 PARTS REFERENCE CRIPTION QTY. 5.30 BALL GUIDE #2 & OPTO RY HATS 5.32 BALL GUIDE #7 & OPTO RECEIVER ASSEMBLY H T-25 511-7900-02 511-7900-07... -
Page 54: Groot Jaw & Bracket
GROOT JAW LIFT PARTS REFERENCE GROOT JAW & BRACKET GUARDIANS OF THE GALAXY GUARDIANS OF THE GALAXY 500-1090-00 511-7931-00 5.34 GROOT JAW & BRACKET 5.36 GROOT JAW LIFT 511-7931-00 500-1090-00 QTY. Y HATS ITEM NO. PART NUMBER DESCRIPTION QTY. 515-1883-00 WELDMENT, JAW MOTOR BRACKET, FURRY HATS 511-7932-00 ASSEMBLY, JAW MOTOR &... -
Page 55: 4-Ball Trough
GUARDIANS OF THE GALAXY 4-BALL TROUGH 500-1068-00 GUARDIANS OF THE GALAXY 511-9975-00 PARTS REFERENCE 5.37 4-BALL TROUGH 5.38 BACK PANEL ASSEMBLY ITEM NO. PART NUMBER DESCRIPTION QTY. 525-9720-00 BACK PANEL, FURRY HATS 511-9975-00 519-5000-08-LED SOCKET & LED ASSY, WHITE 500-1068-00 511-5096-00 ASSY, ELEC GATE LEFT, BP MT QTY. -
Page 56: Specifications
SPECIFICATIONS 6. SPECIFICATIONS 500-55L7-01 SPECIFICATIONS, MECHANICAL, GAME SETUP SPECIFICATIONS, ENVIRONMENT Specification Imperial Metric Minimum Maximum Weight 210 lbs 96 kg Temperature, Operating 32 ℉ / 0 ℃ 104℉ / 40 ℃ Max dimensions, leg lev- 78 x 27.75 x 57 in 198 x 70.5 x 145 cm Temperature, Storage 32 ℉... -
Page 57: Warranty
Stern Pinball Inc (‘SELLER’) warrants only to the initial purchaser of its striking nearby objects. products that the items listed below are free from defects in material... - Page 58 1-800-KICKERS GUARDIANS OF THE GALAXY LE #500-55L6-01 GUARDIANS OF THE GALAXY PREMIUM #500-55L7-01 PARTS.SERVICE@STERNPINBALL.COM MANUAL #780-50L6-00 WWW.STERNPINBALL.COM *780-50L6-00* FACEBOOK.COM/STERNPINBALL...