Quiet Operation (Cooling Mode/Cooling Area Of Dry Mode); Quiet Operation (Heating); Powerful Mode Operation - Panasonic CS-MZ5SKE Service Manual

10.4 Quiet Operation (Cooling Mode/Cooling Area of Dry Mode)


Purpose
To provide quiet cooling operation compare to normal operation.
o

Control condition
Quiet operation start condition
o
 When "POWERFUL/QUIET" button at remote control is pressed twice.
QUIET will be shown on remote control display.
Quiet operation stop condition
o
 When one of the following conditions is satisfied, quiet operation stops:

POWERFUL/QUIET button is pressed again.

Stop by OFF/ON switch.

Timer "off" activates.

ECONAVI button is pressed.

Mild Dry Cooling button is pressed.
 When quiet operation is stopped, operation is shifted to normal operation with previous setting.
 When operation mode is changed, quiet operation is shifted to quiet operation of the new mode.
 During quiet operation, if timer "on" activates, quiet operation maintains.
 After off, when on back, quiet operation is not memorised.

Control contents
Fan speed is changed to Lo-.
o

10.5 Quiet Operation (Heating)


Purpose
To provide quiet heating operation compare to normal operation.
o

Control condition
Quiet operation start condition
o
 When "POWERFUL/QUIET" button at remote control is pressed twice.
QUIET will be shown on remote control display.
Quiet operation stop condition
o
 When one of the following conditions is satisfied, quiet operation stops:

POWERFUL/QUIET button is pressed again.

Stop by OFF/ON switch.

Timer "off" activates.

ECONAVI button is pressed.

Mild Dry Cooling button is pressed.
 When quiet operation is stopped, operation is shifted to normal operation with previous setting.
 When operation mode is changed, quiet operation is shifted to quiet operation of the new mode, except
fan mode only.
 During quiet operation, if timer "on" activates, quiet operation maintains.
 After off, when on back, quiet operation is not memorised.

Control contents
Fan speed manual
o
 Fan speed is changed to Lo-.
Fan Speed Auto
o
 Fan speed is changed to Lo-.

10.6 Powerful Mode Operation


When the powerful mode is selected, the internal setting temperature will shift lower up to -2°C for Cooling, -1°C
for Soft Dry or higher up to 3.6°C for Heating than remote control setting temperature for 20 minutes to achieve
the setting temperature quickly.
53