Assistance - IACER I-TECH MAG2000 PLUS User Manual

If you find any malfunctioning using MAG2000 PLUS, please follow
these instructions:
•
check the main integrity by connecting a running device to the same
main;
•
check the connection with power supply and connection cables
integrity;
•
check the correct connection between MAG2000 PLUS and the
applicator (or the applicators);
•
check all the operations have been done properly;
•
every two years we suggest a complete check of device (contact the
manufacturer or locator dealer).
If you find any problems contact immediately the National Distributor or
manufacturer at the following address:
Via S. Pertini, 24/a • 30030 Martellago (VE) - ITALY
Tel. +39 0415401356 • Fax +39 0415402684

Assistance

Every intervention on device must be performed by manufacturer. For
any assistance intervention contact the National Distributor or the
manufacturer at the following address:
Via S. Pertini, 24/a • 30030 Martellago (VE) - ITALY
Tel. +39 0415401356 • Fax +39 0415402684
You can get any technical documentation on spare parts but only prior
business authorization.
I.A.C.E.R. Srl
I.A.C.E.R. S.r.l.
www.iacer.it • iacer@iacer.it
I.A.C.E.R. S.r.l.
www.iacer.it • iacer@iacer.it
26 MNPG53-02