Mag2000 Plus Free Memories Use - IACER I-TECH MAG2000 PLUS User Manual

the treatment. During pause time green led turns off till the treatment
restarts.
Attention: it's possible to get out from the treatment at any time by
pressing once
pressing key again screen will display programs menu (step 5).
Attention: MAG2000 PLUS recognizes applicators correct connection.
During the treatment screen displays connection state under the
magnet icon. The presence of symbol
or 2) is an indicator of correct connection and applicator recognition.
The symbol X near to the channel number (1 or 2) indicates a not
correct connection of applicator, or its absence or even its incorrect
functioning (see "Functioning control" paragraph).

MAG2000 PLUS free memories use

MAG2000 PLUS has the possibility to store 10 free memories (from
USER 01 to USER 10) choosing therapy parameters as treatment time,
field intensity and working frequency.
In free memories only the professional solenoids couple must be
used thanks to its rechargeable high intensity.
1. Connect the applicator (or the applicators) to the device by
connecting applicator cable to one of two plugs (CH1-CH2) placed
on device upper side;
2. Connect the power supply cable to the main, then connect the power
supply plug to the circular connector placed on device upper side,
near to ON/OFF switch;
3. Connect the power supply plug to the main (110-230VAC, 50-60
Hz);
4. Move the ON/OFF switch, placed on device upper side, to the ON
position: I-TECH logo and programs menu will be displayed on
screen;
5. Running through programs menu using
put yourself on desired program;
I.A.C.E.R. Srl
key, screen will display the base setting (step 6). By
18
near to the channel number (1
and buttons and
MNPG53-02