System and Test Status Messages
System and test status information is selected from the Status menu.
The following information is included on this screen:
T
T
T
T
Self-Test Results Messages
One of these self-test result messages appears in the Self-Test Results field at the
top of the System and Test Status screen.
Table 5-6.
Last System Reset Date and Time
This field indicates the last time the FrameSaver unit was reset. It appears after
the Self-Test Results field at the top of the System and Test Status screen.
T
T
9123-A2-GB20-20
Main Menu → Status → System and Test Status
Self-Test Results Messages
Last System Reset Date and Time
Health and Status Messages
Test Status Messages
Self-Test Results Messages
Message
What It Indicates
Failure xxxxxxxx
An internal failure occurred
(xxxxxxxx represents an
8-digit hexadecimal failure
code used by service
personnel).
Record the failure code
before resetting the unit;
otherwise, the error
information will be lost.
Passed
No problems were found
during power-on or reset.
Date is in mm/dd/yyyy format (month/day/year).
Time is in mm:ss format (minutes:seconds).
August 2001
5. Operation and Maintenance
What To Do
1. Record the failure code.
2. Reset the unit.
3. Contact your service
representative.
No action needed.
5-13