Determining Whether A Download Is Complete; Changing Software - Paradyne FrameSaver FLEX 9123 User Manual

Determining Whether a Download Is Complete

To see whether a download has completed, check the Identity screen.
Check Alternate Software Rev. under the NAM Identity column.
T
T
T

Changing Software

Once a software upgrade is downloaded, it needs to be activated. When activated,
the unit resets, then executes the downloaded software. With this feature, you
control when the upgrade software is implemented.
Procedure
To switch to the new software:
9123-A2-GB20-20
Main Menu → Status → Identity
If a software revision number appears, the file transfer is complete.
If In Progress appears, the file is still being transferred.
If Invalid appears, no download has occurred or the download was not
successful.
1. Go to the Control menu, and select Select Software Release.
Main Menu → Control → Select Software Release
The currently loaded software version and the new release that was just
transferred are shown.
If the download failed, Invalid appears in the Alternate Release field
instead of the new release number. Repeat the procedure in Upgrading
System Software if this occurs.
2. Select Switch&Reset.
3. Enter Yes to the Are you sure? prompt. The unit resets and begins
installing the newly transferred software.
4. Verify that the new software release was successfully installed as the Current
Software Revision.
Main Menu → Status → Identity
NOTE:
If someone opens a Telnet session and accesses the unit's Identity screen
while the unit is downloading software, the In Progress... message
appears in the Alternate Software Revision field.
See Displaying System Information
unit's Identity screen.
August 2001
5. Operation and Maintenance
on page 5-2 to see what is included on the
5-43