ABB DPA Upscale RI Series User Manual page 103

Open Maintenance Bypass (IA1) by turning it to position "OFF". The load is now supplied by the static
7.
bypass of all three Modules. Check LED-indicators on control panels.
Transfer load to Inverter-Mode by means of COMMAND "LOAD TO INVERTER" on any one of
8.
control panels. On LCD: "LOAD PROTECTED" will appear and the LED-indicator will indicate as
shown below:
LED Indicator
LINE 1
LINE 2
BYPASS
INVERTER
BATTERY
THE LOAD IS NOW PROTECTED BY THE DPA UPScale
04-3006_S5_OPM_ABB_DPA_UPSCALE_RI_10-80kW_EN_150316.doc
Colour
Green
Green
OFF
Green
Green
TM
Modifications reserved
Section-5
Page 14/14 ABB