IBM e Server i Series Manual page 69

__ 16. Connect the cables to the system unit as show in Figure 4 on page 64. A
to A , B to B , and C to C .
__ 17. Align the guide pin E on the disk unit enclosure with F in the system
unit.
__ 18. Start installing but do not tighten the four screws G that secure the disk
unit enclosure to the system unit.
__ 19. Install the two screws H . Use the tool that was shipped with the disk unit
enclosure to install the two screws H shown in View 1 .
__ 20. Finish tightening the four screws G .
Install the 7124 or 7127 disk unit enclosure
63