System-Unit Control Panel - IBM e Server i Series Manual

System-unit control panel

Go to the front of your iSeries system unit. Open the control panel door.
Your control panel looks like either Figure 1 or Figure 2 on page 44. Refer to the
control panel for your unit.
Figure 1. Control panel without Electronic Keystick
Following are the descriptions of the Figure 1 callouts:
If your control panel looks like Figure 2 on page 44, before you can use F
Increment/Decrement buttons and G Enter push button, you need to press H
Mode Selects to select Manual mode N . To use Mode Select, the keystick needs to
be inserted.
© Copyright IBM Corp. 2000, 2005
A
Power On Light
v A blinking light indicates power to the unit.
v A constant light indicates that the unit is on and working.
B
Power Push button
C
Processor Activity
D
System Attention
E
Function/Data Display
F
Increment/Decrement buttons
G
Enter Push button
43