Programming Instructions; Requirement; Hardware Set-Up; Software Set-Up - Sony CMD-J5/J16 Service Manual

5.1 Requirement

• PC (486 type or higher) with Microsoft "Windows" Operating System
• One COM-port free for usage
• The Data Transfer Cable (p/n 1-757-348-11)
PREPARATION FOR SOFTWARE UPDATE

5.2 Hardware set-up

• Copy all the files to the PC (define own directory).
• Connect the Data Transfer Jig to the PC COM-port (COM 1 or COM 2) and the CMD-J5/J16 external
connector.
• Attach battery pack to CMD-J5/J16; the CMD-J5/J16 is powered up from the battery pack.
• The initial settings of the flash.exe program may not correspond with the normally correct settings. It is highly
advisable to check the settings first (see 5.3 Software set-up).

5.3 Software set-up

5.3.1 ∗ Download Software to Mobile (Software Update)
• Start the program flash.exe by double-clicking on its icon in the Windows Explorer.
Section 5

PROGRAMMING INSTRUCTIONS

DATA
TRANSFER
CABLE
15
J5 Flash.exe