Sony CMD-J5/J16 Service Manual page 2

Power requirements
Operating temperature
Accessories operating temperature
Connectors
Supplied accessories
Optional accessories
NOTE
This device contains electrostatically sensitive components. Damage can occur to these components
if the appropriate handling is not adhered to.
ESD Handling precautions:
A working area in which Digital Cellular Telephones may be safely handled without undue risk of
damage from electrostatic discharge must be available.
The area must be equipped as follows:
All working surfaces must have a dissipative bench mat, safe for use with live equipment,
connected via 1.2M
A quick release skin contact device with a flexible cord, which has a built-in safety resistor of
a range between 5.2K
dissipative earth point.
All containers and storage must be of the conductive type.
3.9 V (nominal)
-10°C to +55°C
± 0°C to +45°C
External RF connector
Bottom Connector (12-pin flat I/O connector)
Mini plug head set jack
AC Adapter
Battery (std.)
AC cable
Headset
Battery (std.)
Ω
resistor to a common ground point.
Ω Ω
and 1.2M shall be used. The flexible cord must be attached to a
QN-3TC
QN-J5BPS
QN-3HS
QN-J5BPS
2