Programming Instructions; Requirement; Hardware Set-Up; Software Set-Up - Sony CMD-CD5 Service Manual

Portable digital cellural telephone with accessories

Hide thumbs Also See for CMD-CD5:

Table of Contents

• PC (486 type or higher) with Microsoft "Windows" Operating System

• One COM-port free for usage

• The Data Transfer Jig (p/n 1-792-172-11)

PREPARATION FOR SOFTWARE UPDATE

• Copy all the files to the PC (define own directory).

• Connect the Data Transfer Jig to the PC COM-port (COM 1 or COM 2) and the CMD-CD5 external connector.

• Attach battery pack to CMD-CD5; the CMD-CD5 is powered up from the battery pack.

• The initial settings of the flash.exe program may not correspond with the normally correct settings. It is highly

advisable to check the settings first (see 3.Software set-up).

∗ Loading new software into the flash

• Start the program flash.exe by double-clicking on its icon in the Windows Explorer.

• Select "File"/"Settings..." and check if the settings for the "Com Port", the "Baud Rate" and the "Erase Mode"

are correct. Normally the "Load Options" do not have to be changed. The default values are :

Section 6

PROGRAMMING INSTRUCTIONS

TRANSFER JIG

Com Port :

Baud Rate :

Load Options :

Erase Mode :

DATA

COM 1

115200

Both

Program Area, Smart Erase

(! Disable melody area for normal software update)

(! Disable NVM data area for normal software update)

Flash.exe

Table of Contents